Marktech Optoelectronics Introduces Its SERIES 4 Photodiode Process

The Marktech Optoelectronics SERIES 4 Photodiode Process is specifically designed for use @365 nm (.22A/W) or in Blue/Green applications requiring very high sensitivity, low noise and long-term stability against UV and Gamma Radiation

Latham, New York , January 16, 2018 (Newswire.com) – Marktech Optoelectronics, a Latham, New York-based manufacturer of standard and custom optoelectronics, has […]

By |January 16th, 2018|Press|Comments Off on Marktech Optoelectronics Introduces Its SERIES 4 Photodiode Process|

UV Curing Module

The QuickCure™ QC250 UV Curing Module was developed for the machine designer tasked with upgrading traditional UV bulb-curing systems to a more reliable UV-LED platform. The QC250 UV Curing Module features an array of 100 high power UV LEDs configured into a 1 inch x 1 inch board space and produces upwards of 19.2 […]

By |July 5th, 2017|Blog|Comments Off on UV Curing Module|

Customization of Optoelectronic Detectors

Part Two in a Six-Part Series
>> Download a PDF of the version of the “Customization of Optoelectronic Detectors” article.

Utilizing our 30 years of experience in optoelectronics, Marktech’s customization process focuses on customer needs and applications. Instead of using standardized–but perhaps non-optimized–parts, Marktech allows advantageous custom product variations to enhance your product design.

Custom packaging and […]

By |May 9th, 2017|Blog|Comments Off on Customization of Optoelectronic Detectors|

Marktech Announces Custom Reticle Capabilities

One of the first optoelectronics companies
to offer a 10-micron red dot reticle
April 27, 2017

LATHAM, NEW YORK… Marktech Optoelectronics, a Latham, New York-based manufacturer of standard and custom optoelectronics, has announced their new custom reticle capabilities. This display technology is used in applications, which include rifle scopes, binoculars, cameras, and range finders. All of Marktech’s […]

By |April 26th, 2017|Blog, Press|1 Comment|

Marktech Optoelectronics and Digi-Key Now Offer Custom-Made Photodetectors

Marktech Optoelectronics has teamed up with Digi-Key Electronics, a global electronic components distributor, to offer the ability to obtain custom-made photodetectors specifically designed and optimized to meet customer specifications.
The custom-made photodetectors can be made from any of the following Marktech product lines: silicon photovoltaic or photoconductive photodiodes, avalanche photodiodes, phototransistors, or InGaAs PIN photodiodes. […]

By |April 13th, 2017|News|Comments Off on Marktech Optoelectronics and Digi-Key Now Offer Custom-Made Photodetectors|

Marktech Offers Extensive Lineup of Standard SWIR LED Emitters in a Variety of Packaging Options

Marktech, a premier optoelectronic manufacturer, offers an extensive lineup of standard short wave infrared, or SWIR LED emitters in a variety of packaging options. Products in this family range from 1020nm to 1720nm with operating currents from 20mA to 350mA and can be additionally sorted for specific wavelength or power requirements.

Infrared LEDs are used […]

By |April 5th, 2017|Blog, News|Comments Off on Marktech Offers Extensive Lineup of Standard SWIR LED Emitters in a Variety of Packaging Options|

Customization of Optoelectronic Emitter Materials

A Brief Summary of Part One in a Six-Part Series on Customization

>> Download a PDF of the comprehensive version of the “Customization of Optoelectronic Emitter Materials” article.

Utilizing our 30 years of experience in optoelectronics, Marktech’s customization process focuses on customer needs and applications. Instead of using standardized–but perhaps non-optimized–parts, Marktech allows advantageous custom product […]

By |March 4th, 2017|Blog|Comments Off on Customization of Optoelectronic Emitter Materials|

A Brief Introduction to Customization

A Brief Introduction to Customization
The First in a Six-Part Series

INTRO:

This introduction is the first installation in a six-part series focused on how Marktech does optoelectronic customization–both emitter and detector components and assemblies that are specifically designed for your application. The series will include in-depth analysis of materials, packaging, and testing based on our 30 […]

By |February 14th, 2017|Blog|Comments Off on A Brief Introduction to Customization|

Marktech Exhibiting at Photonics West & BiOS Expo

Marktech Optoelectronics to Showcase Custom Product Capabilities at Photonics West & BiOS Expo
One of the only companies in the U.S. offering custom optoelectronics for small or large production runs

January 9, 2017

LATHAM, NEW YORK…Marktech Optoelectronics will highlight their custom emitter and detector capabilities at the SPIE Photonics West conference in San Francisco’s Moscone Center from […]

By |January 11th, 2017|Blog, Press|Comments Off on Marktech Exhibiting at Photonics West & BiOS Expo|

Marktech Optoelectronics Now Offers Customization of Light Rings

Offering reflects Marktech’s enhanced capabilities in custom design and products to meet customers’ unique specifications

December 14, 2016

LATHAM, NEW YORK… Marktech Optoelectronics has announced that as part of its new customization program, it will now offer the customization of light rings that are precisely engineered for a customer’s specific application.

The customization of light rings […]

By |December 27th, 2016|Press|Comments Off on Marktech Optoelectronics Now Offers Customization of Light Rings|